The Hurricane Forum
The Hurricane Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 General
 Everything Else
 Batch View		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic   

jlshapiro
Starting Member

USA
3 Posts
Posted - October 05 2007 :  09:39:06 AM  Show Profile  Visit jlshapiro's Homepage  Reply with Quote
Need some help. I'd like to create a script that opens an ACAD file zooms to a window view & pauses for 10 seconds to let me look at the view. Then does not save the view & goes on to the next drawing & does the same thing.

What I'm doing is inserting a PE stamp into a drawing in Hurricane. The view zoom script will be used to check the "PE-insert" worked OK w/o printing & checking 100's of drawings.

JS
Jim S

Admin
Administrator



652 Posts
Posted - October 05 2007 :  09:46:27 AM  Show Profile  Visit Admin's Homepage  Reply with Quote
Hi JS,

Your script could look something like this...


ZOOM
W
123,456 567,899 <-change coords here


Then make sure you have the DELAY and TEST RUN checkboxes selected.
The DELAY checkbox automatically appends a DELAY command to the script, and the TEST RUN box supresses the QSAVE that is normally automatically added to the script by Hurricane.

If you want, you can put the DELAY in the script itself, like "DELAY 10000" (10 seconds), so you can play with the timing.

I hope this helps you out!?

Regards,
Bill
Hurricane for AutoCAD
http://www.74mph.com
FAQ at
http://www.74mph.com/faq/faq.html
Tutorials at
http://www.74mph.com/tutorials.html
Go to Top of Page
  Previous Topic Topic   
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
The Hurricane Forum © 2009 - 2021 Go To Top Of Page
This page was generated in 0.22 seconds. Snitz Forums 2000